We just started on a dining table commission for a 42x96 inch custom live edge rustic modern dining table for our customers in Sedona. We sourced some extra special rare Arizona-grown Black Cherry reclaimed/fallen from a property in Cottonwood. Black Cherry is extremely uncommon for Arizona to begin with and this tree was especially old, estimated at over 200 yrs. We are working with the bookmatched slabs from the pith of the log which have spidery quarter sawn grain all ove

We recently started work on the bookmatch to the first large pistachio we started processing in our post from a couple weeks back about finishing pistachio slabs for a local saw mill. We've now poured close to 1/2 gallon of resin into these pieces top and bottom before jointing together as 1 large dining table top. #bookmatched #pistachio #liveedgediningtable #butterflyinlay #diningtable

We were recently commissioned to build an heirloom quality dining table for a local family using two reclaimed Mesquite slabs. They are approximately 26x96x2.25 and will give us a finished table size of 5ftx7.4ft when combined with a handcut piece of smoked glass. Our welder has started work on the X-Frame base that will end up getting a smoked chrome powdercoat finish and supporting the massive slabs. #rivertable #mesquite #liveedgediningtable #glassinlay #modernrustic

We started on this Western Red Cedar River Table project this week. This slab is over 1000 yrs old and had a lot of bore beetle damage that had to be stabilized. We filled all voids with System 3 slow cure resin. It took almost 1/2 gallon of resin in over 10 stages to completely fill all voids. #westernredcedar #liveedgerivertable #diningtable #woodslabtable #glassinlay #rivertable #liveedgediningtable

This post will take you through our process of creating a large river style dining table and bench that we've been commissioned to build. We started with 3 reclaimed urban lumber silky oak live edge slabs from Wine Glass Bar Saw Mill here in Phoenix. All slabs were planed and drum sanded thickness matched before using the Festool TS75 track saw to cut off the outside edges and the DeWalt compact plunge router to cut the glass channels. We created a glass template and had a 1